HolyBro-Kakute-F7-V1.5-AIO-&-Tekko32-F3-Metal-65A-ESC-Combo, Taman Johor Jaya

For complete description please visit holybro site. Shopee only allowed 3000 letters.
ESC tested and rated by DroneMesh as the best ESC he'd tested so far.

The Holybro Kakute F7All-In-One flight controller makes it easy to build your multirotor. It integrates flight controller (FC), power distribution board (PDB), and on-screen display (OSD) in one. The Kakute F7 AIO’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.
IMU updated to MPU6000,Re-designed and more reliable damping structure

Specifications
MCU: STM32F745 32-bit processor
IMU: MPU6000 (SPI)
Barometer: BMP280
Current Sensor: Approximately 130 amps maximum measurable value
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
6 hardware UARTS (UART1,2,3,4,6,7)
All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
TF card for Blackbox logging
Dimensions: 35x48x7mm (includes foam-mounted gyro board in height)
Mounting Holes: Standard 30.5mm square to center of holes
Weight: 11.2g

Package Includes:
FC board *1
Foam*1

BLHELI32 / Current sensor / 6S / 65 A / F3 MCU
New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed.
Supports up to 80A burst and 65A continued. (ESC mounted under props, without anything covered on the ESC)

SPEC:
· F3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz
· Mosfet tested at 4S 65A, under props, nothing covered for 1min
· 18 x 27 mm
· Supports Lipo 3-6S
· Ext. cap needed for 6s (220uf 35v for 6s usage.)
· Onboard WS2812B LED
· Weight: 4.4g (1pcs)

Package included:
Tekko32 F3 Metal ESC *1
Electrolytic capacito: 220uF 35v *1
24AWG 100mm Black wire *1
24AWG 100mm White wire *1
24AWG 100mm Blue wire *1
16AWG 100mm Red wire *1
16AWG 100mm Black wire *1