NEW BAXS Power Amplifier XM-200 550 Watt×2 Channel Power …, Subang Jaya

XM-200 professional audio amplifier can be bridged to 450WX2 Class D, one to two, ultra-low loss
Overload protection
When the amplifier channel output current exceeds its specified peak current output, the current will be limited by the protector to operate within the specified range.
Overvoltage/undervoltage protection
When the operating voltage exceeds the upper limit of the maximum allowable operating voltage or is lower than the lower limit of the minimum allowable operating voltage, the power supply enters protection mode and turns off the power supply.
Power Control
It supports power output control. Through the power scale setting on the panel, the connected speakers can work safely and reliably within the power requirement range.
temperature protection
When the operating temperature of the radiator exceeds the limited temperature value, the output power will be limited; when the operating temperature of the power supply exceeds the limited temperature value, the output will be turned off. When the temperature returns to within the limit value, it will automatically restart.
front panel
2.Channel A/B volume adjustment
3-channel A/B signal indication
4. Electric switch
rear panel
1. Electrical connection
2. Channel A/B speaker output interface
4. Channel A/B audio input interface
5. Channel A/B is connected to other amplifier audio interfaces in series
6. Bridge/stereo/mono selection
BRIGDE: bridge STERED: stereo
MONO: serial audio mono
Performance Parameters:
SNR: 112dB(A-weighting)
Frequency Response: 20Hz-20kHz+/-0.25dB
Damping Factor：>1000
Switch Rate: 50V/us
Input Impedance:30k balanced
Input Sensitivity:0.775V
DC Besidual:<5mV
Working Voltage:90V-264V±10%, 50Hz
Power Factor cos(p):>0.95@>500W
Maximum Output Voltage/Current:100Vpeak/50Apeak
Power:standard switch mode with PC(Power Factor Correction) techniqu