Guitar Bridge Pins Puller Pulling Remover Extractor Tool …, Shah Alam

Function: the guitar removal tool is designed to pull bridge pin directly without damaging your guitar; And the bridge pins are small and exquisite, useful replacement parts for guitars
Durable guitar puller: the bridge pin puller is made of good quality alloy; It is lightweight and portable, a nice accessory for your guitar, easy to use
Suitable range: the guitar puller fits most standard bridge pins, serving as the puller, extractor and removal tool for replacing bridge pins of acoustic guitar
Guitar bridge pins: 31 mm in length and 8 mm in diameter of its' head Suitable for acoustic classical guitar, folk guitar, ukulele, Martin or Taylor
How to Replace Guitar Saddle
Take the pins, strings, saddle out in order;
Check the saddle's thickness, the saddle if it is thicker;
Make sure that saddle will not fall off when the guitar is reversed;
Mark the position on the guitar bridge;
Check the saddle height, the saddle if it is higher;
Make sure the right gap, recommended height of string is about:
LowE= 0.125 inch (3mm), HighE= 0.08 inch (2mm).
How to Replace Guitar Nut
Clean the nut and guitar neck with a or tool;
Kick the nut off the neck with a hammer or screwdriver;
Pull the nut out with a tweezer;
Check the nut's thickness, the nut if it is thicker;
Put nut in slot, recommended space is about: LowE= 0.01 inch (0.25mm), HighE= 0.005 inch (0.15mm);
Mark the redundant length of nut, and them off.
Colour:3 color(Black + silver + Off-white)
Material:Metal+ABS

Package Contents:
1 x guitar bridge pin puller,
2 x guitar saddle,
2 x guitar nut,
6 x ivory guitar bridge pins
6 x black guitar bridge pins
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.