Water Decal MG PMX-003 THE-O MG-22 There Are 2 Sheets …, Seremban
Water Decal MG PMX-003 THE-O MG-22 There Are 2 Sheets …, Seremban
RM31.71
-
Seremban, Malaysia -
Posted: yesterday
-
Save -
Share
Description
????Water Decal, Water Decal, Water sticker for sticking on the Gundam body, Gundam.
✅Brand: Snow Flame
✅Water decals Water decals for sticking on the Gundam Gunpla body can glow when shining with UV black light 365 nm.
✅How to use: Immerse the decol in water for 3-5 minutes. The decals will come off the sheet of paper. And then use a clamp or artistic separately Place it on the Gundam body in the desired position. After the decals are nearby dry. May use Mark softer to apply on the decal for better soft decals on the Gundam. Leave it for 24 hours. Then use Clear Top coat to protect the decal skin from peeling off.
✅If after a while, the decals begin to get old, they may come off, use Mark setter as an adhesive to prevent peeling.
✅Decal Size: 15.5 x 22 cm. X 2
✅The decals do not have an attachment guide. You can see the manual for attaching to that Gundam at all or visiting the 1999.co.jp website. And enter Gunpla
✅If you want to cut the line, you should cut the line before sticking the water decal.
⭐Inquire in Shopee Chat.
????Water decal, water sticker for sticking on gunpla.
✅Brand: Snow Flame.
✅Water decals, water stickers for sticking on gunpla. The decal will glow when exposed to a UV black light 365 nanometer.
✅How to use: Soak the water decal in water for about 3-5 minutes. The decal will come off the paper. Then use tweezers or artknife to separate it and place it on the gunpla in position. Desired. After the decal is nearly dry, you may use Mark softer to apply it on the decal to make the decal softer and stick on the gunpla better. Leave it for 24 hours, then use clear Top coat to spray over it, to protect the decal surface from peeling off.
✅If after a while the decal starts to get old and may come off, use Mark setter as glue to help prevent peeling off.
✅Decal size: 15.5 x 22 cm. X 2
✅The decal does not come with an installation manual. You can view the manual for attaching to that Gundam or go to 1999.co.jp and go to gunpla.
✅If you want to cut the line, you should cut the line before attaching the water decal.
⭐If you have any questions, you can ask in Shopee Chat.
✅Brand: Snow Flame
✅Water decals Water decals for sticking on the Gundam Gunpla body can glow when shining with UV black light 365 nm.
✅How to use: Immerse the decol in water for 3-5 minutes. The decals will come off the sheet of paper. And then use a clamp or artistic separately Place it on the Gundam body in the desired position. After the decals are nearby dry. May use Mark softer to apply on the decal for better soft decals on the Gundam. Leave it for 24 hours. Then use Clear Top coat to protect the decal skin from peeling off.
✅If after a while, the decals begin to get old, they may come off, use Mark setter as an adhesive to prevent peeling.
✅Decal Size: 15.5 x 22 cm. X 2
✅The decals do not have an attachment guide. You can see the manual for attaching to that Gundam at all or visiting the 1999.co.jp website. And enter Gunpla
✅If you want to cut the line, you should cut the line before sticking the water decal.
⭐Inquire in Shopee Chat.
????Water decal, water sticker for sticking on gunpla.
✅Brand: Snow Flame.
✅Water decals, water stickers for sticking on gunpla. The decal will glow when exposed to a UV black light 365 nanometer.
✅How to use: Soak the water decal in water for about 3-5 minutes. The decal will come off the paper. Then use tweezers or artknife to separate it and place it on the gunpla in position. Desired. After the decal is nearly dry, you may use Mark softer to apply it on the decal to make the decal softer and stick on the gunpla better. Leave it for 24 hours, then use clear Top coat to spray over it, to protect the decal surface from peeling off.
✅If after a while the decal starts to get old and may come off, use Mark setter as glue to help prevent peeling off.
✅Decal size: 15.5 x 22 cm. X 2
✅The decal does not come with an installation manual. You can view the manual for attaching to that Gundam or go to 1999.co.jp and go to gunpla.
✅If you want to cut the line, you should cut the line before attaching the water decal.
⭐If you have any questions, you can ask in Shopee Chat.
Highlights
-
PriceRM31.71
-
Flag -
Block ad
Safety Tips
Avoid carrying more cash on you than required.
More info about this ad
Water Decal MG PMX-003 THE-O MG-22 There Are 2 Sheets … has been posted in the Seremban Collectables category on Locanto.
If you’re still wanting to browse, there is so much to explore in the Collectables category! Take a look at the ads 【PRE-O RM237】GOOD SMILE COMPANY POP UP PARADE Hatsune Miku: …, Seremban, ????CLEARANCE???? OFFICIAL BTS RM INDIGO Book Version / Edition , Seremban and Golden yellow citrine crystal gemstone BIG size in Seremban to discover more of what you’re looking for. In total, we have 305 ads in Collectables in Seremban on Locanto classifieds.
There are more ads within a 15 km radius for this category. If you want to view those ads, click here.
Flag this image
