SCULPFUN S10 Laser Engraver 10W Engraving Cutting Machine …, Petaling Jaya

Specifications:
Power Input: 100-240V AC, 50/60Hz Output: 12V 5A
Diode laser output power: 10W (note that this is light energy not electrical energy)
Inner diameter of auxiliary air hose: 7.5mm/0.29" (30L/min, 0.03Mpa air compressor is recommended, and the outer diameter of air outlet interface is recommended to be 8mm/0.31")
Laser wavelength: 455±5nm
Engraving accuracy: 0.01mm
Engraving area size: 410*400mm/16.14*15.75"
Focusing method: Fixed focus column + sliding device
Laser protection cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles.
Machine power consumption: about 36W (not related to engraving or cutting performance, just power consumption)
Engraving/cutting materials:
Engraving material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, bamboo, cardboard, plastic, leather, PCB board, alumina, 304 stainless steel, ceramic, dark stone
Cutting material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven fabric, bamboo, leather, some plastic boards, PCB boards
Operating software: LaserGRBL, LightBurn, LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support for Windows system, support for MAC system.
Supported file formats: NC, BMP, JPG, PNG, DXF and other image formats.
Data transfer method: USB connection
Equipment net weight: 3.42kg
Packing weight: 5.13kg
Packing size: 600*345*130mm/23.62*13.58*5.12"
Product size: 560*510*265mm/22.05*20.08*10.43"

Precautions:
1. Because of the powerful laser power of S10, it is forbidden to run the engraving machine without supervision. Pause it if you're not around.
2. For detailed machine instructions, please refer to the manual for parameter settings.
3. When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
4. Do not touch the laser with your hands, otherwise you may burn your hands.
5. Please avoid strong impact on the machine.
6. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult supervision.
7. Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.

Packing List:
1 x X-axis assembly
2 x X profiles
2 x Y profiles
1 x Control box assembly
3 x Support feet
1 x S10 laser
1 x 12V 5A power adapter
1 x Power cord
1 x USB cable
1 x Air tube
3 x Too