EverSolo AMP-F2 Audio Power Amplifier, Klang

The AMP-F2, developed in collaboration between the Starke Sound team and the Eversolo team, is based on the innovative NS600 module created by the Starke Sound team.It boasts a high sampling rate of up to 600kHz. Simultaneously ,it significantly reduces noise and enhances dynamic performance through the newly designed SAPS audio-specific switch power supply.It employs an efficient Class D amplification structure, coupled with optimized circuits to maximize audio quality. The AMP-F2 is bridgeable, allowing flexible configuration for 2-channel or mono-channel setups when needed.

Vigorous Output Bridged Support
The AMP-F2 is equipped with Starke Sound's NS600 amplifier module, each channel can output a constant 250W RMS(4 Ω) @ 1%THD+N. When bridged, it can support up to 450W RMS (2 Ω) with THD +N still below 1%. This ability to handle extremely low-impedance loads ensures ample energy even in large and challenging speaker setups, particularly during high-dynamic low-frequency outputs.

Accurate Sound Perfect Experience
The NS600 module employs PurePath Ultra-HD technology and advanced integrated feedback design, featuring high-speed gate driver error correction funtions. This technology achieves fultra-low distortion across the entire audio frequency range delivering perfect high-end audio quality.

Powerful Power Drive
Utilizing a 600W high-efficiency, low-ripple, low-EMI switch power supplier, it delivers cconsistent and powerful output, extremely low noise, enhancing the overall dynamic performance of the system.

Environmentally Friendly Low Power Consumption
AMP-F2 has extremely low standby power (0.5w) and idle power consumption (14W), complying with the European Union ErP standards.

Aluminium Body Shielding Design
Complete self-protection and anti-interface design to avoid disturbances from various electrical environments.

One - Touch Activation Seamless Control
The AMP -F2 is equipped with satndard 12V TRIGGER IN and TRIGGER OUT function, allowing it to be synchronized with other devices that support the standard TRIGGER interface for power on and off, using the USB to TRIGGER adapter cable provided with the AMP0-F2,you can connect the USB type A interface of the DMP-A6 to the TRIGGER IN of the AMP-F2 to achieve synchronization.

- Output Power - 280W RMS at 4Ω（1%THD，per channel）130W RMS at 8Ω（1%THD，per channel）
- Bridge Mode Output Power - 450W RMS at 2Ω（Bridge Mode）
- Channel quantity - 2 Channels
- Amplifier type - Class D
- Frequency Response - 10Hz-20kHz -1.2dB
- Maximum output current - 16.5A（per channel）/ 33A（Bridge）
- Signal-To-Noise Ratio（SNR）- >110dB,"A" weighted 4Ω 260W
- Input terminals - 2-Channel RCA Input ；2-ChannelXLR Input
- Input Impedance - RCA 10.5K ohm /XLR 21.7K ohm
- Output terminals - 2 pairs beryllium copper binding post，custom made by Starke Sound
- Output Impedance - 0.09 ohm 1kHz
- Damping coefficient - 100
- Full size- W 270 mm x D 228 mm x H 90 mm (w/ foot))
- Weight - 3.65Kg