Venturi Phi Fertilizer Set 34/ 49/ 60/ 90 mm, Kajang

???? Product Description
Venturi is a basic stool that is simply designed with the main task of putting fertilizer/nutrients dissolved from the tank into the main pipe of the irrigation system to provide. Nutrition to plants replace traditional fertilizers. Venturi is based on pressure difference without the use of power
???? ADVANTAGES OF DISTRIBUTOR
- - Made of engineering - Made of engineering plastic with high durability
- - Good chemical resistance, suitable for most chemicals
- - Improved design with convergence, semester and suction throat points designed with optimal ratio
- The suction head is equipped with a valve to avoid reverse suction
- Fine filter helps prevent and limit hard particles / garbage entering the irrigation system
- - High efficiency, compact design
- Reasonable cost savings
- - Various sizes suitable for many installation scales
???? Specifications

????Venturi 34 Acupuncture Kit:
- Total flow: 1.82-6.34 m3/H
- Suction flow: 34-279 L/H
- Pressure: 0.7-9.5 bar
- Thread connection: 34 - Threaded outer thread

????Venturi 48/49 Acupuncture Kit:
- Total flow: 4.31-12.73 m3/H
- Suction flow: 46-680 L/H
- Pressure: 0.7-9.5 bar
- Connector thread: external thread 48mm(49mm)

????Venturi 60 mm acupuncture kit:
- Total flow: 6.8 -19.12 m3/H
- Suction flow: 379-1,390 L/H
- Pressure: 0.7-9.5 bar
- Connector thread: 60mm outer thread
????Application
Use fertilizer suction, liquid nutrients, air (Oxygen) to provide the system, bring nutrients to the irrigation pine tree/irrigation hose
???? User manual
- Make sure the Venturi sprayer must always be installed in a horizontal or vertical position facing upwards and in the direction of flow (the flow arrow is marked on the Venturi body)
- Always use the right valves and accessories to create a full flow when installing Venturi, be careful not to use pipe accessories smaller than the thread size of the venturi body.
- - Do not tighten the venturi body too tightly when fixing them to pipes or accessories, instead should use specialized melting tape/glue
- - Venturi analysis works thanks to the pressure difference. Normally, the output pressure must be at least 25-30% smaller than the input pressure to effectively absorb
- - It is recommended to use a pressure gauge to determine the actual pressure difference

✴️ COMMITMENT FROM HOANG DUONG COMPANY:
☑️ RENOVATION WITHIN 12 MONTHS OF USE DAMAGED
☑️DO NOT SELL HUGE, FAKE, POOR QUALITY PRODUCTS
☑️ COMMITMENT TO GENUINE COMPANY PRODUCTS