[Taiwan Iot] Mini Version NRF24L01+Wireless Module Power …, Johor Bahru

Mini Version NRF24L01+Wireless Module Power Enhanced Version 2.4G Wireless Transceiver Module

NRF24L01 Is A Single Chip Transceiver Chip That Works At 2.4-2.5GHz World's Universal ISM Band, Wireless Transceiver Includes: Frequency Generator Enhanced SchockBurstTM Mode Controller Power Amplifier Crystal Amplifier Modem Output Power Channel Selection And Protocol Settings Can Be Set With SPI Interface Extremely Low Current Consumption, When Working At 6dBm Transmit Power In Transmitter ModeThe Consumption Is 9.0mA, And The Current Consumption Mode Is Lower In 12.3mA Power Off Mode And Standby Mode.

Global Open ISM Frequency Band, Maximum 0dBm Transmit Power, License-Free Use.

Support Six-Channel Data Reception

Product Features
- Low Working Voltage: 1.9~3.6V Low Voltage Working

- High Speed Rate: 2mbps, Due To The Short Air Transmission Time, It Greatly Reduces The Collision Phenomenon In Wireless Transmission (The Software Set The Air Transmission Rate Of 1Mbps Or 2mbps)

-Multi-Frequency Point: 125 Frequency Point To Meet Multi-Point Communication And Frequency Jump Communication Needs

- Extra Small: Built-In 2.4GHz Antenna, Compact Size, 15 x 29mm (Antenna Included)

- Low Power Consumption: When Working In Answering Mode Communication, Fast Air Transmission And Starting Time, Greatly Reducing Current Consumption.

- Low Application Cost: Nrf24L01 Integrates All High-Speed Signal Processing Parts Related To The RF Protocol, Such As: Automatically Reissue Lost Data Packets And Automatically Generates Answering Signals, Etc., The Spi Interface Of The Nrf24L01 Can Be Connected Using The Hardware Of The Microcontroller Spi Port Or Simulated With The Microcontroller I/O Port, And There Are FIFO Inside Which Can Be Connected With Various High And Low Speed Microprocessors Interfaces For Easy Access To Low-Cost Microcontrollers.

- Easy To Develop: It Is Very Easy To Develop Because The Link Layers Are Fully Integrated On The Module.Automatic Reissue Function, Automatic Detection And Reissue Of Lost Data Packages, Reissue Time And Reissue Times Can Be Controlled By Software Automatically Store Data Packages That Have Not Received The Answer Signal Automatic Response Function, After Receiving The Effective Data, The Module Automatically Sends The Answer Signal, No Additional Program Design Carrier Detection Required - Fixed Frequency Detection Built-In Hardware CRC Error Detection And Point-To-Point Communication Address Control Data Package Transmission Error CounterAnd The Carrier Detection Function Can Be Used For Frequency Jumping Settings. The Six-Channel Reception Channel Address Can Be Set At The Same Time, And The Selective Opening And Receiving Channel Standard Pin Dip2.54MM Spacing Interface Is Available For Easy Embedding