FT232 FT232BL FT232RL USB 2.0 to TTL Download Cable Jumper …, Ipoh

for programming microcontrollers such for , boarduino, Bareduino, , ESP8266, Mini minimOSD, and Xmega Xplained, mini pro, or any other that can be programmed over serial
After installing the driver,This TTL adapter a COM port on your computer/laptop.
Through this simulated COM port, you can communicate or program with various hardware or MCUs, such for board, , ESP8266, router and so on.

Main chip: FT232BL
Pin Definition: ,,RXD,TXD,GND,VCC
Output VCC: 3.3V or 5V
USB interface: 2.0
With 500MA self-recovery fuse reversed does protection
The maximum speed: 921600bps
List of supported systems
Windows xp,7,8,10
Ubuntu 11.10, 3.0.0-19
Mac 10.3 to 10.8 (32 &64 bit)
Mac 10.9 and above(64 bit)
Instructions for use:(Example MCU)
GND: Connect to GND
RXD: Connect to MCU.TX (Signal : MCU.TX FT232 PC.RX)
TXD: Connect to MCU.RX (Signal : MCU.RX Less than Less than FT232 Less than Less than PC.TX)
3V3/5V: Output 3.3V or 5V (module powered by USB, jumper cap :to 3.3V or 5V)
: Connect to MCU. (Signal Direction: MCU. Less than Less than FT232 Less than Less than PC.)
: Connect to MCU. (Signal : MCU. FT232 PC.)
Material:plastic
colour:Black+gold

Package Contents:
1 x Adapter Module
1 x 5Pin Line(Note: Random color, don't accept the specified color.)

Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.