*THETOPHARDWARE* AUTOMATIC PUMP PRESSURE CONTROLLER 1100W …, George Town

*THETOPHARDWARE* GRANDPRO AUTOMATIC PUMP PRESSURE CONTROLLER 1100W 1.5HP 10 BAR AUTO BOOSTER PAM AIR SENSOR

[ Product Overview ]
Pressure controller is used to automatically control the functioning of electric water pumps. It can guarantee the optimum control of electric pumps used in plumbing systems. Being an intelligent mix of hydraulic and electronic engineering, the control maintains both pressure and flow and controls the operation of the pump automatically. It needs no pressure tank as in the traditional systems. There are no plenum chambers to recharge and no irritating variation in pressure and in flow at the point of use. No adjustment or maintenance is required. It is absolutely dependable, durable and simple to install.

[ Product Features ]
The unit is programmed to perform all the pump control operations automatically. When particular operational breakdowns occur, such as water failure, obstruction of the suction pipe, etc., the unit recognizes the breakdown and a red LED Failure lights up, at the same time a stop signal is sent to the pump to prevent damage caused by it working in the absence of water. After rectifying the cause of the failure the system to be restarted by pressing the Reset button.

[ Product Specifications For Pumps ]

Model : PS-01
Rated Voltage : 240V
Max. Current : 10A
Frequency : 50Hz
Max. Power : 1100W ( 1.5HP )
Starting Pressure : 1.5bar
Max. Pressure : 1Mpa ( 10 Bar )
Max. Operating Temperature : 60°C
Inlet / Outlet : 1" (25mm)
Protection Grade : IP65 (Waterproof)
This controller comes pre-wired and plug top

[ Package Included ]
1 x Pressure Controller
1 x Operation Manual
1 x Packing Box